Tides were measured using a portable pressure transducer secured to fast ice at the mouth of Pagodroma Gorge with the transducer about 4 metres below low water line. A 30 day record was obtained. Documentation dated 2001-03-07 Beaver Lake and the Stillwell Hills In Dec 1996 - Jan 1997 a temporary pressure type tide gauge was deployed at Beaver Lake and the Stillwell Hills in open water. Timed water level measurements were made over this period. From these data a value for MSL was found for Beaver Lake and the Stillwell Hills.

Tides were measured using a portable pressure transducer secured just below low water line. A 30 day record was obtained. Numerous manual water level measurements were made to connect the tide gauge to the local benchmark. From these observations a local mean sea level was obtained. Documentation dated 2001-03-07 Beaver Lake and the Stillwell Hills In Dec 1996 - Jan 1997 a temporary pressure type tide gauge was deployed at Beaver Lake and the Stillwell Hills in open water. Timed water level measurements were made over this period. From these data a value for MSL was found for Beaver Lake and the Stillwell Hills.

Tides were measured using a portable pressure transducer secured just below low water line. A 22 hour record was obtained. A connection was made to the local Pageos benchmark by leveling and a 2 hour GPS observation. Additionally, the National Tidal Centre also has tidal data from Heard Island for 1948, 1980 and from 1986-1987. Documentation dated 2001-03-07 Heard Island Tide Gauge. A Platypus Engineering tide gauge was deployed in a heavy steel tetrahedral mooring in Atlas Cove in 1993. Two attempts have been made to recover the gauge without success. In March 1997 a temporary tide gauge was used to obtain a 22 hour record. A rock bolt was placed in the rock close to the deployment site and a connection was made to the Pageos Site by a 2 hour GPS observation. A level and staff was used to measure the height of the temporary gauge relative to the BM (AUS258). From these observations an approximate MSL can be found. Some further information about the data can be found in the download file.

Tide gauge data collected from pressure tide gauge at Hurd Point, Macquarie Island. Data were collected between 1996-03-07 and 1996-10-27. A temporary tide gauge was installed at Hurd Point as it was suspected that there was a 6 minute wave around the island. The installation was made to determine whether this is correct. Photo Oblique aerial photos showing location of tide gauge, bench mark AUS188 and Hurd Point trig and photo mof GPS set up. Gravity meter set up adjacent tide gauge Temporary Bench Mark Survey Scans of survey field notes showing location of tide gauge in relation to Hurd Point huts, AUS188 and old Auroral Camera stand, vertical differences between AUS188, tide gauge temporary mark and tide gauge housing.

Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring in Nella Fjord in the Larsemann Hills near Zhong Shan station. Tidal records are retrieved from the gauge using an inductive loop lowered through a hole in the ice hence the gauge has been undisturbed since it was deployed. Documentation dated 2001-06-12 Zhong Shan Submerged Tide Gauge The gauge used at Zhong Shan was designed in 1991/2 by Platypus Engineering, Hobart, Tasmania. It was intended to be submerged in about 7 metres of water in a purpose made concrete mooring in the shape of a truncated pyramid. The mooring for the Zhong Shan gauge was cast in concrete at Davis and sling loaded by helicopter to Nella Fjord in the Larsemann Hills and deployed through a hole in the ice. The gauge measures pressure using a Paroscientific Digiquartz Pressure Transducer with a full scale pressure of 30 psi absolute. The accuracy of the transducer is 1 in 10,000 of full scale over the calibrated temperature range. The overall accuracy of the system is better than +/- 3 mm for a known water density. Data is retrieved from the gauges by lowering a coil assembly on the end of a cable over a projecting knob on the top of the gauge and by use of an interface unit, a serial connection can be established to the gauge. Time setting and data retrieval can be then achieved. Data has been retrieved from this gauge once since deployment. The records are complete since deployment. Conversion of raw data to tidal records is done as detailed in document: Details of Conversion of Raw Data. Levelling One attempts has been made at establishing an absolute height for this gauge using timed water level measurements. Documentation dated 2008-10-17 Zhong Shan. The battery in the submerged gauge at Zhong Shan has probably been exhausted. The gauge will be removed at an opportune time. The gauge has not recently been download. There will still be some records available.